CP1W-8ED
CP1W-8ED
More models in this seriesI/O expansion unit, 8 x 24 VDC inputs
EnquireStock Availability
View More
View Less
Quantity | Availability |
---|---|
Available immediately as of 21/03/2024 | |
Please note that the quantities shown are indicative only and are not guaranteed.
We are unable to obtain real time stock information for this product. Click here to contact sales directly.
Please note that the quantities shown are indicative only and are not guaranteed. Click here to contact sales directly.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Product Description
I/O expansion unit, 8 x 24 VDC inputs
SKU: CP1W0055HSpecifications
Accessories
Accessories
There are accessories in this model
Downloads
Downloads
Enquire
Enquire
Articles for this model
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
February 10, 2023
Using CP1[] Modbus Control For RX2 Inverter Drives
Introduction This document describes the procedure to configure and connect a CP1[] series PLC to an RX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/RX2 user and illustrates easy programming and c
May 25, 2023
Learn how to set up CP1W-EIP61 Ethernet/IP Option Board
This document shows how to set up CP1W-EIP61 Ethernet/IP option board: Set DIP Switch to enable slot 1 or 2. Related Ethernet/IP Settings: Instance assembly 102 100 byte ( Inputs)Instance assembly 103 100 byte ( outputs)Configuration: 128.EIP61 card
February 19, 2024
Connecting a CP1L/H PLC to an NB HMI using a CP1W-EIP61 Option Board
Introduction This guide will show the process of connecting a CP1L or CP1H PLC to an NB HMI using a CP1W-EIP61 option board. Normally the connection of a CP1L or CP1H to an HMI is documented assuming the use of an NS HMI, or a CP1W-CIF41 option board
March 04, 2024
NB with CP1L through COM1/RS232(Host Link) and MX2 through COM2/RS485(Modbus RTU)
Introduction This article explains how connection can be established with a CP1L (CP1W-01) using Host Link (RS232C) and two MX2 Inverters using Modbus RTU. 1. Connecting Methods Host Link (RS232C)NB with CP1L through COM1/RS232 (Host Link) Modbus