S8BA Separated battery type
S8BA Separated battery type
Compactness, weight reduction, and long battery life realized thanks to the adoption of a lithium-ion battery.
Push-in terminal block adopted for the power input and output I/F.
Shutdown in conjunction with the industrial purpose computer (IPC) or controller realized by the USB/RS- 232C/I/O port installed in the UPS.
Two types of batteries are selectable for the 480W, allowing the ideal backup time to be realized.
A wide lineup culminating in the 960W makes it possible to provide long-lasting backup for every type of industrial controller.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
March 01, 2022
Step By Step Guide: System Recovery for NA HMI
Introduction This guide outlines the procedure to perform a system recovery for an NA-series HMI. System recovery should be performed in the following circumstances: When it is impossible to download a project to an NA device using Sysmac Studio
January 31, 2022
Grounding the 0VDC line for power supplies (PELV)
Protected Extra Low Voltage Often the 0VDC terminal of the 24VDC power supply is connected to earth. The below diagram shows a circuit with a PELV setup. However PELV implementations should not be used for devices with CPU loads such as HMIs and PLCs
September 07, 2022
Why do NX IO units have separated Unit Power and IO Power?
Why should you implement dual power supplies for modern control systems
February 04, 2022
CP series PLC addressing
Introduction In the CP series (CP2E, CP1H & CP1L) units are added to the CPU unit and cascade to the right in a daisy chain manner. It is straightforward to determine the words which are assigned to the inputs and/or outputs for each module. Mo