To transfer a program from an NB screen perform the following steps:
Step 1: On the tool bar click Tools → System Manager
Step 2: Click Upload Operation and then Upload Project Files
Step 3: If you need the recipe or logo files select those as well and click ok.
Step 4: Select a location to save your PKG file
Step 5: The program will prompt you for a password enter: 888888
Please note the 888888 is the default password. Omron cannot help you recover your password if this has been changed from default.
Step 6: After the program has finished transferring click Decompile Operation and then Select
Step 7: Select the pkg file we have just transferred from the PLC
Step 8: Click the bottom select button and select a location to save the new project folder
Step 9: You will once again be prompted for a password use 888888
Please note the 888888 is the default password. Omron cannot help you recover your password if this has been changed from default.
Step 10: Once the pkg file decompiles open the project file in the location you selected to access the project
