Selection tool
Decision Tree
What PLC am I using to communicate with the HMI?
-
N-Series OMRON PLC
-
C-Series OMRON PLCs
-
Third party PLCs
- Add Button
NA series if allowable, since the NA is directly integrated in Sysmac Studio. The NB series can also work with the NJ/NX series PLCs.
This content will be shown (depending on) when button above is clicked
NB series.
This content will be shown (depending on) when button above is clicked
The NB series works with most PLCs, but depends on the protocol of the PLC. Refer to the link below for compatible models.
NB-series Programmable Terminals Host Connection Manual
The NB with part number ending "V2" will not support communicating with a third-party PLC.
NB-series Programmable Terminals Host Connection Manual
The NB with part number ending "V2" will not support communicating with a third-party PLC.
Direct HMI Replacement
| Discontinued Product | Recommended Replacement |
| NT21-ST121 | NB3Q-TW01B or NB5Q-TW01B* |
| NT21-ST121B-E | |
| NT31-ST123(B)-EV3 | NB5Q-TW01B* |
| NT31C-ST143(B)-EV3 | |
| NT631C-ST153(B)-EV3 | NB10W-TW01B* |
| NS[]-[][][][](B)-V2 | NA5-[]W[]01[]-V1* |
Delete
Info
*: This is not a direct replacement, the code on the discontinued product cannot be converted directly to fit into the current product and will have to be re-written.
Current HMI Comparison
| Item | Model | NB Series | NA Series |
| Appearance |  |
 |
|
| Features |
|
|
|
| Ports |
|
|
|
| Communications Protocols | Modbus, RS-232C, Ethernet | RS-232C, Ethernet | |
| Sizes |
|
|
|
| Display Resolution |
|
|
|
| Programming Software | NB Designer | Sysmac Studio | |