Introduction
The purpose of this document is to find the firmware revision of 3G3MX2 EIP Option Board through an explicit message using the devices Object dictionary. Whilst this can be found through the web browser interface, this principal can be applied to all other EIP Devices.
Applies to the following configuration as an example:
Ethernet/IP devices have the following object models which can be accessed implicitly and explicitly.
For this specific use case, the identity object, Class 01, Instance 01, Attribute 65 will provide the revision of the EIP device.
Pre-Requisites
Please link any other KB articles or prior knowledge here which are referenced here
Further Reading
Any manual references can be put here. Note you can put hyperlink to the manuals stored on eStore once this is setup
Please refer to these Precautions and Terms and Conditions which relate to the information and program samples provided before proceeding
Procedure
Step1
Info
It is assumed that users understand Network Configurator basics.
When connected to the network, select Tools -> Setup Parameters.
Enter following parameters as per Identity Object:
Step 2
When sent to the IP address, the device responds with its firmware revision.
