NJ101-9000
NJ101-9000
More models in this seriesSysmac NJ1 CPU, 3MB memory, built-in EtherCAT (0 servo axes, in total 64 EtherCAT nodes) and EtherNet/IP
EnquireStock Availability
View More
View Less
Quantity | Availability |
---|---|
Available immediately as of 19/04/2024 | |
Please note that the quantities shown are indicative only and are not guaranteed.
We are unable to obtain real time stock information for this product. Click here to contact sales directly.
Please note that the quantities shown are indicative only and are not guaranteed. Click here to contact sales directly.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Product Description
Sysmac NJ1 CPU, 3MB memory, built-in EtherCAT (0 servo axes, in total 64 EtherCAT nodes) and EtherNet/IP
SKU: NX010044MSpecifications
Accessories
Accessories
There are accessories in this model
Downloads
Downloads
Enquire
Enquire
Articles for this model
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
May 03, 2022
Ethernet/IP Setup Guide Using Network Configurator
Introduction The purpose of this document is to demonstrate the process of setting up an Ethernet/IP network using two master PLC's via Network Configurator. Disclaimer The PLCs used in this example have been pre-allocated two IP address. This exam
September 05, 2023
Sysmac Studio Lite vs. Standard
Edition comparison Sysmac Studio Lite and Standard editions differ only by the PLC series they are compatible with. Sysmac Studio Lite edition only allows to open, edit and synchronise projects for the following series: NX1P2, NX102, NJ101. Sys
October 13, 2022
How to upload and download to NX safety controller
Introduction The article describes the correct procedure to download and upload safety programs to the NX safety controller. The applicable models are: NX-SL3300 NX-SL3500 NX-SL-5500 NX-SL5700 Setup This article describes the process using the follow
May 16, 2022
Selection Guide for OMRON PLCs
PLC Selection Guide Flowchart Decision Tree Am I controlling robots? Yes No Add Button NJR PLCs. Do I require more than 60 I/O points including analog I/O? Yes No Add Button Do I need remote I/O? Yes No Add Button Do I need advanced functionalities s