CS Communication Units
CS Communication Units
Omron supports the 2 major field networks, DeviceNet and PROFIBUS-DP. For high-speed field I/O, Omron's own CompoBus/S offers an unsurpassed ease of installation. Fully user-configurable Serial and CAN-based communication can be used to emulate a variety of application-specific protocols.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
February 19, 2024
F3SG Safety Light Curtain Pre-Reset Function
Introduction This guide illustrates how to enable and use the Pre-Reset function of an F3SG Safety Light Curtain. The Pre-Reset function adds an additional step to the process of removing a stop condition, which allows for increased safety for situat
April 01, 2024
Step by Step Guide - CP1L-E connection to an NS Screen via Ethernet/FINS
Introduction This document highlights the methods of: Configuring CP1L ethernet/FINS communications settings: 192.168.250.2 Configuring NS10 ethernet/FINS communications settings: 192.168.250.3 Setting a routing table to set both devices on the same
February 19, 2024
Connecting a CP1L/H PLC to an NB HMI using a CP1W-EIP61 Option Board
Introduction This guide will show the process of connecting a CP1L or CP1H PLC to an NB HMI using a CP1W-EIP61 option board. Normally the connection of a CP1L or CP1H to an HMI is documented assuming the use of an NS HMI, or a CP1W-CIF41 option board
November 28, 2023
CP and NJ FINS TCP Sample Code
Most models of OMRON PLC support FINS commands, which can allow you to transmit data from one PLC to another. These commands are cross platform compatible, so a CP series PLC can communicate to an NJ series PLC via FINS. The SEND(Send) command allows