CS Digital I/O Units

models in this series

Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery

Models

Models

There are models in this series

Show
Sort by

Accessories

Accessories

There are accessories in this series

Show
Sort by

Downloads

Downloads

Enquire

Enquire

Articles for this series

You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.

August 10, 2023

Configure Omron NX‐EIC202 EtherNet/IP Coupler for Use with Rockwell Automation PLCs

1 Introduction This article shows the basic steps for configuration of a Rockwell Automation PLC to connect to the OMRON NX‐EIC202 EtherNet/IP coupler. The guide will assume the hardware installation has already been completed following [W536].  T

September 12, 2023

Monitoring safety I/O units

Scenario You need to check the wiring of external devices to the safety I/O units. In this mode you can also confirm if the devices are operating correctly.  Reference material https://assets.omron.eu/downloads/manual/en/v3/z930_nx_series_safety_con

February 19, 2024

F3SG Safety Light Curtain Pre-Reset Function

Introduction This guide illustrates how to enable and use the Pre-Reset function of an F3SG Safety Light Curtain. The Pre-Reset function adds an additional step to the process of removing a stop condition, which allows for increased safety for situat

March 04, 2024

NB with CP1L through COM1/RS232(Host Link) and MX2 through COM2/RS485(Modbus RTU)

Introduction This article explains how connection can be established with a CP1L (CP1W-01) using Host Link (RS232C) and two MX2 Inverters using Modbus RTU.   1. Connecting Methods Host Link (RS232C)NB with CP1L through COM1/RS232 (Host Link) Modbus

Start a Conversation
This conversation is closed
Uploading...