G-Series Motors
G-Series Motors
Peak torque 300% of continuous torque during 3 seconds or more depending on model
Servo motors supported by SmartStep2, G-Series and Accurax G5 servo drives
Cylindrical and Flat servo motors types are available
Encoder accuracy of 10,000 pulses incremental as standard and 17-bit absolute
IP65 as standard and shaft oil seal available
Motors with brake as option
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
October 06, 2023
TM Cobot Payload Derating
Introduction The TM series collaborative robots each have a payload rating, however they are derated as the payload moves further from the flange. The maximum allowed payload of the robot arm is related to its center of gravity offset, which is def
November 28, 2023
CP and NJ FINS TCP Sample Code
Most models of OMRON PLC support FINS commands, which can allow you to transmit data from one PLC to another. These commands are cross platform compatible, so a CP series PLC can communicate to an NJ series PLC via FINS. The SEND(Send) command allows
February 19, 2024
Connecting a CP1L/H PLC to an NB HMI using a CP1W-EIP61 Option Board
Introduction This guide will show the process of connecting a CP1L or CP1H PLC to an NB HMI using a CP1W-EIP61 option board. Normally the connection of a CP1L or CP1H to an HMI is documented assuming the use of an NS HMI, or a CP1W-CIF41 option board
February 19, 2024
Step by Step Guide - NS Projects to NS Runtime for IPCs
Subtitles are in english