G9SE
G9SE
Simple front side wiring using screw-less terminals.
17.5 or 22.5 mm width to save mounting space
15ms Max. response time
Safe OFF delay function up to PLe
Certification for lift standards EN 81-1, EN 81-2
Up to Ple according to EN ISO 13849-1 and SIL 3 according to EN 61508
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
June 07, 2022
G9SE Safety Relay Wiring
Overview This document provides examples and explanations of input and output wiring of a G9SE safety relay unit, including the G9SE-201, G9SE-401, G9SE-221-T05 and G9SE-221-T30. Power Supply Input (A1, A2) Connect the power supply's positive termina
May 20, 2022
G9SE Fault Detection
Scenario The power indicator light on your G9SE unit is blinking, or other indicator lights are blinking when the power indicator light is on. Additionally, the G9SE is not outputting an 'ON' signal. Issue A fault has occurred with either the G9SE or
May 25, 2023
How to set up F3SG-SR light curtain with Manual Reset mode with reset switch
Note, It is necessary to use the same 24VDC power supply for both light curtain and Safety controller like G9SE or Safety PLCs.