Machine controller accessories
Machine controller accessories
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
August 10, 2023
Configure Omron NX‐EIC202 EtherNet/IP Coupler for Use with Rockwell Automation PLCs
1 Introduction This article shows the basic steps for configuration of a Rockwell Automation PLC to connect to the OMRON NX‐EIC202 EtherNet/IP coupler. The guide will assume the hardware installation has already been completed following [W536]. T
September 12, 2023
Monitoring safety I/O units
Scenario You need to check the wiring of external devices to the safety I/O units. In this mode you can also confirm if the devices are operating correctly. Reference material https://assets.omron.eu/downloads/manual/en/v3/z930_nx_series_safety_con
August 30, 2023
Optimizing Performance for Quattro Robot Control with EX Controller: Limitations and Recommendations
1.1 Purpose To explain the factors that limit the EX Controller's ability to manage three or four Quattro Robots simultaneously. 1.2 Setup Typical Vision Based Conveyor Tracking with PackManager (previously PackXpert) application and PLC Communicatio