MX2

models in this series

High starting torque: 200% at 0.5 Hz
Torque control in open loop vector
Double rating VT 120%/1 min and CT 150%/ 1 min
IM & PM motor control
Safety conforming to ISO13849-1 Category
3 performance level PLD
Built-in Logic programming
Positioning functionality
Integrated at Omron machine Automation solution
Fieldbus communications: EtherCAT, Modbus, DeviceNet, Profibus, CompoNet, MECHATROLINK-II and EtherNet/IP
Ratings: 200 V single-phase from 0.1 to 2.2 kW, 200 V three-phase from 0.1 to 15.0 kW, 400 V three-phase from 0.4 to 15.0 kW.

Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery

Models

Models

There are models in this series

Show
Sort by

Accessories

Accessories

There are accessories in this series

Show
Sort by

Downloads

Downloads

Enquire

Enquire

Articles for this series

You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.

July 27, 2023

How to Factory Reset a MX2 Inverter

To factory reset a MX2 Inverter use the following procedure: Step 1:  Set b084 to a value between 1 - 4 according to the table below. For a complete reset use 4. Parameter No Function Monitor or Data Range Default Data b084 Initialization Selection

November 22, 2023

How to password protect the 3G3MX2

This article describes how you may protect a 3G3MX2 drive from unauthorised access. You can choose to either restrict write access, or choose whether parameters are accessible in the first place. These functions can be protected with a 4 digit passco

March 04, 2024

NB with CP1L through COM1/RS232(Host Link) and MX2 through COM2/RS485(Modbus RTU)

Introduction This article explains how connection can be established with a CP1L (CP1W-01) using Host Link (RS232C) and two MX2 Inverters using Modbus RTU.   1. Connecting Methods Host Link (RS232C)NB with CP1L through COM1/RS232 (Host Link) Modbus

March 12, 2024

Difference between 3G3MX2-V1 and 3G3MX2-V2

3G3MX2 Inverters

Start a Conversation
This conversation is closed
Uploading...