Safety mats
Safety mats
1 and 2 cable types
Meets EN ISO 13849-1 (PLd/Safety Category 3) and EN ISO 13856-1
Can be used with MC3 Safety Mat Controller or NX Safety Controller
Complies with North American safety standards including ANSI/RIA 15.06
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
September 12, 2023
Monitoring safety I/O units
Scenario You need to check the wiring of external devices to the safety I/O units. In this mode you can also confirm if the devices are operating correctly. Reference material https://assets.omron.eu/downloads/manual/en/v3/z930_nx_series_safety_con
February 26, 2024
List of File Extensions for Omron Software
Below is a list of file extensions used by Omron Software ABK CX-Supervisor (older versions / pre-unicode 1.3) Alarm- Error log ADR SYSWIN Text address symbols AHD SYSWIN 1.x/PMD address index file (not used in SYSWIN 3.x) ALG CX-Supervisor (older ve
February 19, 2024
F3SG Safety Light Curtain Pre-Reset Function
Introduction This guide illustrates how to enable and use the Pre-Reset function of an F3SG Safety Light Curtain. The Pre-Reset function adds an additional step to the process of removing a stop condition, which allows for increased safety for situat