ZW Series
ZW Series
Spot diameter sizes range from 190 µm down to 4 µm, improving the ability scan minute profiles
Small spot diameter down to 9µm improving the ability to measure minute profiles
Constant spot diameter throughout total measuring range
Slim form factor pen and 90⁰ elbow types – fits anywhere
Response time as fast as 20µs - Enables high-speed sampling during motion
High Resolution of 0.25µm allows hairline pattern measurements or irregular surfaces
Linearity down to ±0.3µm regardless of material type, as a result no tuning is required
Superb angle compensation of ±25⁰ makes the measurement of round or inclined surfaces possible
Machine control integration made easy with available DLL files
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
October 06, 2023
TM Cobot Payload Derating
Introduction The TM series collaborative robots each have a payload rating, however they are derated as the payload moves further from the flange. The maximum allowed payload of the robot arm is related to its center of gravity offset, which is def
November 28, 2023
CP and NJ FINS TCP Sample Code
Most models of OMRON PLC support FINS commands, which can allow you to transmit data from one PLC to another. These commands are cross platform compatible, so a CP series PLC can communicate to an NJ series PLC via FINS. The SEND(Send) command allows
February 19, 2024
Connecting a CP1L/H PLC to an NB HMI using a CP1W-EIP61 Option Board
Introduction This guide will show the process of connecting a CP1L or CP1H PLC to an NB HMI using a CP1W-EIP61 option board. Normally the connection of a CP1L or CP1H to an HMI is documented assuming the use of an NS HMI, or a CP1W-CIF41 option board
February 19, 2024
Step by Step Guide - NS Projects to NS Runtime for IPCs
Subtitles are in english